Mid Coast Certifiers
Mid North Coast, NSW
E1 certifier (NSW)Certificate of compliance
Reliant Pest and Building
E1 certifier (NSW)Certificate of compliance
About this listing
Reliant Pest and Building advertises E1 accredited pool certification services covering Hunter, Newcastle & Central Coast, NSW. Lists E1 certifier inspections for residential and strata pools and spas across the Hunter Valley, Newcastle, and the Central Coast. Regional travel can affect the fee, so ask up front.
An E1 certifier's inspection checks the barrier: fence height of at least 1.2m, no gaps over 100mm under or through the fence, and a gate that self-closes and self-latches. Certifiers accredited under the E1 category are listed on the NSW Fair Trading register of building and development certifiers.
Inspectors also look for a clear non-climbable zone around the barrier, free of pot plants, furniture or anything that could give a child a foothold.
Registers are updated over time, so check current E1 accreditation on the NSW Fair Trading certifier register before booking. We publish name, area and accreditation category only, and are not affiliated with this business.
Get quotes
Tell us where your pool is and what you need, and we will connect you with an accredited inspector or certifier serving your area.
Common questions
Is Reliant Pest and Building an accredited E1 certifier in NSW?
Reliant Pest and Building is listed here as an E1 certifier serving Hunter, Newcastle & Central Coast, NSW. Only certifiers currently accredited by NSW Fair Trading may issue a valid certificate of compliance, and the register changes over time, so confirm current accreditation on the NSW Fair Trading certifier register before you book.
What does an E1 certifier check during a pool inspection?
An E1 certifier checks the pool barrier: fence height of at least 1.2m, no gaps over 100mm under or through the fence, and a gate that self-closes and self-latches, plus a non-climbable zone free of pot plants or furniture.
How long is the certificate valid, and what does it cost?
NSW certificates of compliance run for three years once issued. Expect a first inspection in the rough range of $150 to $300, with reinspection fees usually lower.